If you run a hotel lobby, an office tower, a hospital, or a retail store anywhere it rains, you already know what a dripping umbrella does to tile and carpet. Custom umbrella bags — the disposable plastic sleeves guests slide their wet umbrella into at the door — solve that problem while putting your logo in front of every single visitor on their way in. They’re one of the cheapest branded items you can buy, they ship in bulk cases, and unlike most printed packaging, you can test a supplier with as few as 1,000 to 2,000 pieces before committing to a bigger run.
This guide covers what custom umbrella bags actually cost right now, how minimum order quantities and lead times differ between stock print and a fully custom logo run, and which size and material specs to confirm before you send artwork to a printer.
What custom umbrella bags are actually for
Custom umbrella bags sit in a dispenser or wall-mounted stand just inside a building’s entrance. A visitor pulls one out, slides their wet umbrella in headfirst, and walks through the lobby without leaving a trail on the floor. Property managers install them for the obvious reason — slip-and-fall liability on wet tile and stone is a real insurance concern — but the print space is what makes them worth branding rather than buying generic.
Every person who uses one holds your logo for the length of their visit, then often carries it back out to their car. That’s a longer dwell time than most other giveaway items get, and the cost per impression is a fraction of a cent.
Where they get used
The heaviest users are hotels, hospitals, museums, office towers, casinos, and big-box or grocery retail — anywhere a large volume of outside foot traffic hits a hard, slick floor. Gyms and country clubs use them seasonally. Property management companies sometimes buy a plain-text version for common areas and a logo version for the leasing office specifically.
Bag vs. Stand
The bag itself is the consumable; a separate wire or acrylic stand holds the roll or stack at the door and usually gets bought once. Some suppliers, including the WebstaurantStore listings referenced below, sell stands and bags as separate line items, so budget for the stand as a one-time cost on top of your recurring bag orders.
Custom umbrella bags: what they cost in 2026
Before pricing out a custom logo run, it helps to know the floor. “Stock” umbrella bags — printed with generic wording like “Wet Umbrella Bag” and a small umbrella icon, no logo involved — are the cheapest version of this product on the market. WebstaurantStore sells LK Packaging’s stock line in cases of 1,000, and the price difference between the two standard sizes is small.
Those numbers are the baseline you’re comparing any custom quote against. If a printer quotes you meaningfully more than $0.08 a bag for a basic one-color logo swap at similar volume, it’s worth getting a second quote.
| Bag size | Case quantity | Case price | Per-bag cost |
|---|---|---|---|
| 7″ x 24″ (stock print) | 1,000/case | $64.99 | $0.065 |
| 7″ x 35″ (stock print) | 1,000/case | $79.99 | $0.080 |
Adding your logo: custom print pricing and MOQs
Once you move from stock wording to your own logo, pricing shifts to a per-order quote rather than a shelf price, but real numbers are out there. APlasticBag.com lists custom wet umbrella bags starting at $71 for 1,000 units and $119 for 2,000 units — meaning the per-bag cost actually drops below the stock-print price once you double the order, because the fixed plate and setup charge gets spread over more bags.
For a fully custom, multi-location print job — your logo on both sides, in Pantone-matched color, produced overseas — FF-Packaging’s plastic umbrella bag program lists a 2,000-piece minimum order quantity and a 10-12 week production window, with printing done in one or two colors using flexographic or gravure methods depending on print size. That’s a meaningfully longer lead time than a domestic reorder of stock bags, so factor it into your planning if you’re ordering ahead of a specific season rather than reordering an existing design.
Lead times: plan around wet season, not around your print order
Lead time is where custom umbrella bags catch first-time buyers off guard. A reorder of a design you’ve already approved, printed domestically on stock-style equipment, can often turn around in a couple of weeks. A brand-new fully custom design produced overseas is a different timeline — FF-Packaging’s own program quotes 10-12 weeks from a 2,000-piece order, which covers artwork approval, plate-making, printing, and freight.
If your building sees its heaviest rain or snow traffic in a specific window — late fall through early spring in most of the U.S. — count backward from that date and place your first custom order in summer. Reordering an approved design later takes far less lead time than the first run did.
Material, size, and print specs to confirm before you order
Umbrella bags are made from LDPE (low-density polyethylene) film — the same flexible, tear-resistant plastic used in most retail poly bags. Interplas, one of the manufacturers referenced above, sells a version with an added 1.5-inch lip at the bag’s mouth specifically to help it catch drips rather than let water run back out, which is worth asking about if your entryway sees heavy rain rather than light drizzle.
Print is typically limited to one or two spot colors rather than full-color process printing, applied via flexographic or gravure methods. That’s not a limitation so much as a cost-control feature of the product category — a single-color logo prints cleanly and keeps the per-bag price close to the stock rate, while full-color art adds plates and cost without much visual payoff on a bag that’s used for seconds at a time.
Compact vs. Full-Size
7″ x 24″ bags fit compact and folding umbrellas and are the right default for office buildings and retail stores where most visitors carry smaller umbrellas. 7″ x 35″ bags accommodate full-size and golf umbrellas and are the better choice for hotels, country clubs, and any entrance where guests are more likely to be carrying a large umbrella straight from a car or golf cart.
Color and print method
Confirm your logo will reproduce in one or two flat colors before you send final art — gradients and photographic elements don’t translate well to flexo or gravure printing at this scale, and a printer may quietly convert them, which changes how your logo looks on the finished bag.
How to place your first custom umbrella bag order
Start small and confirm quality before you commit to a volume that locks in savings. A practical sequence looks like this:
- Pick your size based on the umbrellas your visitors actually carry — 7″ x 24″ for compact, 7″ x 35″ for full-size or golf umbrellas.
- Send vector artwork in one or two flat colors rather than a photo or gradient logo, since that’s what flexo and gravure printing reproduce cleanly.
- Order at the 1,000 or 2,000-unit tier first — both are realistic entry points based on current pricing — and request a physical proof, not just a digital mockup, before the full run prints.
- Budget 10-12 weeks for a first custom run if it’s going overseas, and place the order well ahead of your building’s wettest season.
- Once you’ve approved a design, reorder the same artwork rather than resubmitting new files each time — it’s the fastest way to shorten future lead times.
Keep a dispenser stand stocked near every high-traffic entrance, and count usage over a month or two before locking in your next order size — a lobby that sees heavy weekday foot traffic can burn through a 1,000-count case faster than expected.
Frequently asked questions
What size custom umbrella bag do I need?
Most buildings need one of two sizes: 7″ x 24″ for compact and folding umbrellas, or 7″ x 35″ for full-size and golf umbrellas. If your visitors mostly carry compact umbrellas from a car to the door, the smaller size is sufficient and slightly cheaper per case.
How much do custom umbrella bags cost?
Based on current listings, custom-printed wet umbrella bags run about $0.06 to $0.07 per bag at 1,000-2,000 unit quantities, with per-bag cost dropping as the order size increases. Stock (non-logo) printed bags run $0.065-$0.08 per bag in cases of 1,000.
What’s the minimum order quantity for custom umbrella bags?
Custom logo runs typically start around 1,000 to 2,000 units. Fully custom, multi-color overseas production commonly carries a 2,000-piece minimum, per FF-Packaging’s plastic umbrella bag program.
How long does a custom umbrella bag order take?
A first-time fully custom order produced overseas typically takes 10-12 weeks from artwork approval to shipment. Reorders of an already-approved design generally move faster since plates and setup are already done.
Do I need a stand or dispenser for umbrella bags?
A wire or acrylic stand at the entrance makes the bags easier to use and keeps them visible, but it’s a separate one-time purchase from the bags themselves, which are the recurring consumable.
Are custom umbrella bags recyclable?
They’re made from LDPE plastic, which is recyclable at most store drop-off film recycling points, though typically not through curbside residential recycling. If sustainability matters for your brand, ask your printer whether a recycled-content or compostable film option is available.
The bottom line
Custom umbrella bags are one of the rare branded items where the economics are genuinely simple: stock print costs $0.065-$0.08 a bag, custom logo print can actually undercut that once you hit 2,000 units, and the only real planning challenge is lead time on a first custom run. Order a modest first batch, confirm the print quality and fit at your entryway, then scale up once you know your actual usage rate.